Flat Color to Gradient

Allows you to convert the fills and/or strokes of the selected paths from flat colors into two-stop linear gradients, according to the parameters in the Flat Color to Gradient dialog:

Gradiator Flat Color to Gradient Dialog Defaults

A. Color Adjustment Method

Specifies the method that is used to create the color of the first (or second) stop of the new gradient based on the flat color. Five of the methods — Retain, Lighten, Darken, Saturate, and Desaturate — are “presets” (although their underlying parameters can be altered), while the other two, Alter Black and Custom, require numerical parameters to be entered. The default method for the first stop is Lighten; for the second stop it is Darken.

a. Retain: The stop color is identical to the original color.
b. Lighten: The stop color is a lightened version of the original color (default change: +40 Lightness).
c. Darken: The stop color is a darkened version of the original color (default change: –40 Lightness).
d. Saturate: The stop color is a saturated version of the original color (default change: +25 Saturation). e. Desaturate: The stop color is desaturated version of the original color (default change: –25 Saturation).

Gradiator Flat Color to Gradient Preset Examples

f. Alter Black: Available only for CMYK documents. The stop color uses the original color with the black value changed by the specified amount (the final value, of course, being held between 0% and 100%).

Gradiator Flat Color to Gradient Alter Black Example

g. Custom: Enables full control of changing the Hue, Lightness and Saturation of the original color.

Gradiator Flat Color to Gradient Dialog Custom

By default the Hue, Saturation and Lightness sliders operate in standard HSL color space, but using the popup menu you can change this to use the HSLuv space. This is indicated by a small icon.

B. Opacity

Specifies the opacity of the first (or second) stop of the gradient.

C. Midpoint

Specifies the midpoint location of the gradient.

D. Angle mode

Specifies the method used to determine the angle of the new gradient. The default is Absolute.

a. Absolute: The gradient angle is simply taken from the provided value.
b. Relative: The gradient angle is the same as the angle from one anchor point in the path to another, using the anchor point indices provided. This can be useful if you are converting the flat colors of many paths that are the same except for their rotation.

Gradiator Flat Color to Gradient Angle Relative Example

c. Random: The angle is randomly chosen between –180° and 180°.

E. Angle (Absolute)

The value that each new gradient will be given.

F. Angle (Absolute) Visualizer

Shows the angle that each new gradient will be given, graphically. Clicking on the widget will set the angle appropriately.

G, H. Angle (Relative) Anchor Point Indices

The indices of the anchor points in each path from which to calculate the gradient angle. To specify the last anchor point, you can use an index higher than the length of any selected path, such as “9999”.

I, J. Affect Fills/Affect Strokes Checkboxes

Enables conversion of flat colors in the corresponding area of the path.

K. Convert Spot Colors Checkbox

When enabled, spot colors used as a fill or stroke will be converted to the document color model (RGB or CMYK) in order to perform the appropriate color adjustment.

L. “Before” Preview

Shows a sample flat color (taken from the selection) before being converted to a gradient. To cycle through different colors in the selection (if any), click on the preview.

M. “After” Preview

Shows a preview of the gradient into which the sample flat color will be converted.

N. Informational area

Shows a brief description of each control when the cursor is being held over it.

O. Edit Presets... Button

Allows you to change the parameters used in each of the six preset operations:

Gradiator Flat Color to Gradient Presets Dialog

P. Settings Manager

The Settings Manager popup menu provides access to saving, managing, and applying Flat Color to Gradient settings.

Gradiator Flat Color to Gradient Settings Manager Menu

a. Save Settings...

When you save the settings, all of the current settings in the dialog are captured in a file which can be recalled later.

b. Manage Settings...

Brings up the Manage Settings dialog, which lets you rename or delete existing settings files:

Gradiator Flat Color to Gradient Manage Settings Dialog

c. Settings List

Choosing a settings file from this list will change the settings to match the state of the dialog when the settings file was saved (or, the case of [Default Settings], to the default values).